12-month guarantee for any quality problems.
Feel free to get technical support via email/Q&A, or hotline on our official site, Facebook or Twitter, if you are unsure if the scanner tool is suitable for your vehicle, or any questions.
ArtiHD I is a completely TOPDON independent R&D diagnostic scan tool for Heavy Duty and Commercial vehicles with strong main functions as follows:
1) Identification: Read the original control unit information and record it as a reference for purchasing a new control unit.
2) Read Fault Code: Read ECU fault code to help maintenance personnel quickly found the cause of vehicle failure.
3) Erase Fault Code: Clear the fault code stored in the ECU.
4) Actual Values: Determine whether the various parts of the vehicle are faulty through actual values which are real-time data values received directly from the control unit. Offer multiple-system data comparison as well as real-time data graph.
5) Actuators: Test the electronic control system in the implementation of components for its working properly.
6) Advance Functions: Adjustment/Settings; Function Test; Special function; calibration (diesel fuel injector code, idle speed adjustment, broken cylinder test, calibration and so on.
ArtiHD I is characterized by its extensive coverage of supporting brands as follows:
1) Euro 5: Cummins, Weichai, Yuchai, Shangchai, Xichai, Yunnei, Foton, FAW, JMC, Qingling, IVECO, etc. (Read Code, Clear Code, Data Stream, Actuation Test)
2) Gas: WeiChaiWoodardNatural Gas system, WeiChai BOSCH Natural Gas system, YuChaiNatural Gas system, FAWDENatural Gas system, SDEC Natural Gas system, CNHTC Natural Gas system, Nanchong Natural Gas system, Cummins Natural Gas system, etc.
3) Machinery: Engine and Hydraulic diagnosis on Caterpillar, KOMATSU, VOLVO, SANY, HITACHI, Hyundai, etc.
4) Post-processing: Urea pump drive/injection test: BOSCH, Kailong, ACT BLUE, Tenneco, Henghe, Bjcats, CNHTC, SHACMAN, etc.
5) ABS: WABCO, Kormee, BOSCH, WanAn, HongDing, Cnhtc, YaTai, FAW, Qinqi, FAW, DELPHI, JingxiHeavy, Knorr, DongFeng, etc.
2. ECU Reprogram
1) All Euro 3 Bosch EDC 7 across the bottom of the brand reprogram.
2) All Euro 4 Bosch EDC17 bottom cross-version reprogram.
3) EDC16UC40 bottom reprogram (Dongfeng, Xichai, Yuchai, Cha Cha, cloud, etc.)
4) The country 4 Bosch EDC17 ECU read reprogram write data, the country 3 Bosch EDC7 / EDC16 read and write;(Weichai, Xichai, Yuchai, Chaichai, Dachai, Dongfeng, cloud, on the red, heavy truck, Valin, Fukuda, JAC, the whole firewood, Chai Chai, Yang Chai, etc.)
5) The Hino Denso, on the diesel and other equipment.
6) Weichai country 5, the country 6 ECU reprogram write, Yuchai 5 ECU reprogram to write.
7) CBCU reprogram: China National Heavy Duty Truck, Fukuda Auman, etc.
8) DCU reprogram to write: Tenneco, Hino, Weichai autonomy.
1) Weichai, Xichai, Yuchai, Cha Chai, Dafa, Dongfeng, cloud, heavy truck, Valin, Fukuda, JAC, the whole firewood, on the firewood, Yang Chai and other engine calibration function (Euro III IV Bosch EOL) :(Idle speed adjustment, clutch switch, main and auxiliary brake switch, the maximum speed adjustment, preheat control, exhaust brake, fuel oil alarm, starter control, air conditioning control, cruise control, Car start and stop switch, oil pressure sensor, oil in the water sensor, fuel oil alarm, engine alarm light, PTO speed, K value, intake preheat, bridge speed ratio, etc.)
2) The exclusive starting Bosch 4, the Euro 5 post-processing history fault removal function
3) The exclusive starting the highest speed adjustment calibration function, support Bosch / Cummins 4, the Euro 5 and CBCU (heavy truck, Dongfeng, liberation, on the red)
4) The Euro 4, the Euro 5 urea injection temperature setting function, used to reduce the consumption of urea (support Weichai, FAW, Xichai, heavy truck, Yuchai, Chai and other DNOX 2.2 / 6.5)
5) The new Weichai, Yuchai, Dongfeng, Cummins and other nitrogen sensor test calibration function (test nitrogen and the oxygen sensor is good or bad)
6) China National Heavy Duty Truck CBCU, CBCU3 system calibration, Weichai Euro five engine calibration; Cummins Euro five all the calibration function
7) The utility model has the advantages that rubber sleeve is adopted for easy holding, protecting against damages and preventing loosening.
8) The scan tool kit includes a wide-range connector and cables.
9) TOPDON technical team releases a new software version timely for higher user satisfaction.
4. Supported Cars:
Passenger Cars：Mercedes-Benz, Land Rover, HYUNDAI, VW, Zhonghua, JMC, Great Wall, Zhengzhou NISSAN, JAC, ZX auto, Dongfeng, LEO PAARD, Chery, FUDI, GONOW, Huanghai Motor, SsangYong
Construction Machinery：Caterpillar, KOMATSU, VOLVO, SANY, LOVOL, John Deere, HITACH, KOBELCO, HYUNDAI, ZOOMLION, KATO, CASE, LISHIDE, DOOSAN, SUMITOMO, YUTONG, BOBCAT, SHANTUI, LIUGONG, IHI, XUGONG, Kubota, TAKEUCHI, XGMA
Commercial Vehicle：Mercedes-Benz, HINO, ISUZU, UD, VOLVO, FUSO, IVECO, MAN, SCANIA, RENAULT, DAF, DAEWOO, SFH, FAW JIEFANG, DONGFENG, CNHTC, FOTON, SANY, JAC, BYD, CAMC, NAVECO , JMC, ShanQi Heavy Truck, C&C Trucks, QinLing, HYUNDAI, XGMA, BEIBEN TRUCK, KIA, KingLong, YUTONG, HIGER, GOLDEN DRAGON, ShenLong, Toyota, ASIA STAR, CDW, MACK, RENAULT, ERF, BREMACH, SUNWIN, Ashok Leyland, SINO, TATA(TELCO), THACO, YOUNGMAN, ANKAI, XUGONG, Zhong Tong Bus
Memory: SD card 4GB, Maximum support 32GB
Display: 7-inch 800*480 touch screen
Connectivity: OBD16PIN, 3.0 USB (2.0 Compatible)
Input Voltage: 7-32V
Power Consumption: <10W
Operating Temperature: -10°C~45°C
Storage temperature: -15~50°C
Dimensions (W*H*D): 265mm*162mm*31mm
1*Power Extension Cord
1*Battery Clip Supply Line
1*Cigarette Lighter Supply Line
1*SD Card Reader
1*Test Extension Cord (with OBD connector)
1*Power Adapter Kit
1*ArtiHD I Device
1*ArtiHD I Carry Case
1*Multi-function Jumper Adaptor
1*ArtiHD I User Manual